Are you are a beginner artist and looking to add some depth to your drawings? One point perspective is an important first step to making parts of your drawing look 3D.
This page is VERY LONG andincludes many one point perspective tutorials. The lessons start off easy and progressively get more advanced.Much of the lessons here are sequential. This means the knowledge in each perspective lesson builds upon the previous lessons. Feel free to skip around using the table of contents, but If something seems unclear, you most likely need to complete the previous drawing exercise(s). You should actually draw out each exercise, not just skim the page. Perspective drawing gets very technical and needs to be drawn repeatedly to become part of your permanent skill set.
Honestly, there is way too much information to digest in one reading. Bookmark this page so you don’t forget it.Just make sure you understand the basics before attempting to draw the more complicated subjects towards the end of the page!
One Point Perspective Definition
One Point Perspective is a type of linear perspective that uses a single vanishing point to create the illusion of depth in a work of art.
There are several methods of linear perspective, but one-point is a single point perspective and is the simplest.
One point perspective assumes the flat, facing planes of objects have no depth but the sides and edges leading away from the viewer have depth. The artist need only decide the vertical and horizontal measurements of each form and connect them to a single vanishing point. This will create an illusion of depth on paper.
While difficult to discuss in words a few simple one point perspective examples will make this drawing process super easy!
One Point Perspective Vocabulary
There are several lines and components that show up frequently in a 1-point perspective drawing. It’s a good idea to get familiar with them.
Here’s a list of useful vocabulary that is frequently used when describing a one point perspective drawing.
Parallel – Parallel lines are lines that never touch… even if they are extended indefinitely.
Horizontal Lines – Lines drawn from side to side level with the horizon. Horizontal lines will be parallel the top and bottom edges of your paper.
Vertical Lines – Lines drawn up and down and perpendicular (right-angled) to the horizon. Vertical lines should be parallel to the sides of your paper.
I’m always surprised at how many young students don’t know what a vertical or horizontal line is. In a one point perspective illustration you will draw a ton of vertical lines and horizontal lines. Make sure all the vertical lines are upright and parallel to each other. Make sure each horizontal line is sideways and parallel to each other.
Slanted Lines – Lines that are neither vertical nor horizontal; slanted lines are diagonal.
Horizon Line – The horizon line is a special horizontal line that represents eye level to the viewer.
Most of the time he horizon line will be imaginary so while you should include it you should draw it lightly so it can be erased or drawn over later on.
Vanishing Point – A point on the horizon line where all perspective lines meet.
The vanishing point exists on the horizon line. Note: it doesn’t have to be in the middle of the paper.
Perspective Lines (orthogonal lines) – The lines that meet at the vanishing point. Perspective lines are parallel in real life but converge in a one point perspective drawing.
Plane –A plane is a flat,two-dimensional surface with no thickness. A cube, for instance, has 6 planes.
Form – A form is a 3-D object, it contains volume and three dimensions.
One Point Perspective Boxes
The one point perspective method of drawing is best suitable for drawing box-like objects. Although an experienced artist can use perspective drawing to replicate complicated objects, it’s best to start off simple. Learning how to draw a cube in one point perspective is a good starting place.
Here’s an example of a one point perspective cube:
There are the six steps taken to arrive at perspective line drawing of the cube:
Step One
Draw a horizon line. The horizon line is a horizontal line that will represent eye level in the scene.
Step Two
Place a vanishing point on the horizon line. The vanishing point is going to be the point at which we draw the box back towards (you’ll see in step 4).
Step Three
Draw the closest side of the box. This is a square shape. When learning to draw in perspective you’ll probably find it easiest to draw the front side first. This is nothing more than a flat rectangular shape! Notice in the drawing below the orange lines are perfectly vertical. One can also see that the blue lines are perfectly horizontal.
Step Four
Connect the appropriate corners to the vanishing point. This is the magical part about perspective drawing. Creating these perspective lines automatically makes the drawing seem more real and three-dimensional!
Step Five
End the form. Nothing goes on forever. You need to pick a logical place to end the cube. Very Important – Notice how these final lines in the back are parallel to their coinciding lines in the front. The verticals (orange) are vertical in both the front and rear of the box. The horizontal lines (blue) are horizontal in both the front and the rear of the box.
Step Six
Clean up! When drawing in perspective you’re always going to end up with some extra lines or lines that are too long. You can draw all lines lightly first and then ink things later on when you’ve fixed up the drawing.
Practice drawing various sized boxes in different positions around the paper. It’s important to draw each box to the same vanishing point. Remember: using a single vanishing point is how one point perspective earned its name!
One Point Perspective Letters
Once comfortable drawing cube-like forms to a single vanishing point you can easily apply the same technique to lettering. One point perspective will allow letters and words to pop out with a great looking, realistic 3D effect!
Even if lettering is not your thing, pay close attention here. I’m going to use 3D letters as a tool for teaching you some really important one point perspective concepts. These concepts will later apply to drawing buildings, houses, rooms and tons more!
Drawing Simple 3D Letters in Perspective
Let’s start off with some simple letters that don’t have any curves and consist of only straight, horizontal and vertical lines. Remember the 6 steps used above to draw the cube? You can use that same process to draw a one point perspective letter.
Let’s get drawing…
After drawing your horizon line and vanishing point, draw a simple block letter. Keep it simple. Think of the letter as simply rectangles joined together to form the letter. This drawing above will serve as the front facing plane of the 3D letter.
Next, connect the letter’s corners to the vanishing point. Please observe that some of the corners were left out, as we wouldn’t see them in a solid (non-transparent) letter form. Also notice how the inside lines of the “H” stop when they extend beyond the (green) letter shape.
Decide where to end the letter form. It’s important to pay attention to the angles in the original flat letter shape drawn in the front. Notice how in the image above both the front and rear shapes that form the letter “H” line up perfectly with perspective lines. Pay particularly close attention to this aspect of a perspective drawing and you’ll avoid much confusion and drawing errors later on.
Now the letter is complete. The letter “H” we just drew uses a single vanishing point and looks incredibly 3D. How awesome is that? Even though most of the rear letter from the previous step was erased it was necessary to draw in order to accurately calculate the dimensions of this letter. Sometimes you need to draw the parts you can’t see to draw the parts you can!
Now that this letter is drawn it’s worth mentioning a few important one-point perspective takeaways…
It’s worth pointing out the vertical and horizontal lines that are parallel to each other. A common mistake when learning to draw letters in perspective is to accidentally mess up this relationship. Compare your drawing to the diagram above and make sure you have the correct angles drawn.
For a simple letter like this you will have 3 line types (angles):
- Vertical Lines
- Horizontal Lines
- Perspective Lines
Want to practice drawing some perspective letters on your own?
The easiest letters are: E F H I L T (they only contain straight verticals and horizontals)
Letters with Diagonal Angles (slanted planes)
The next letters to try drawing are the ones that contain diagonal lines. Once turned into three-dimensional letters these types of letters will contain slanted planes. These letters such as “K”, “Y”, “Z”, etc… contain some non-perpendicular angles. Let’s try drawing a letter “K” to get the hang of drawing slanted planes in proper perspective!
A good place to start is with the front shape of the letter. In this case it’s nothing more than a simple letter “K”.
Next, you draw all appropriate corners of the letter to the vanishing point. Make sure you use a ruler for this step or things will not line up properly in the next step.
When ending the 3D letter in space remember to follow the front shape of the letter. In the diagram above you can see the blue lines are horizontally drawn and the orange lines are vertically drawn.
Up next will be creating the slanted parts of the letter.
When dealing with slanted angles make sure the front and the back are parallel to each other. (see image above – slanted lines are drawn green).
In the case of our letter “K” there are two distinct angles that make up the slanted part of the letter. Notice how the diagonal purple lines are parallel to each other. When learning to draw complicated forms in perspective, color coding your lines can help you make sense of which lines go where.
Pay attention to the color coding above! Each set of colored lines represent lines that need to be parallel to each other.
Finally we clean up the drawing a bit and we arrive at nicely drawn letter!
Practice drawing some angled letters such as: A K M N V W X Y Z
Letters with Curves
At this point you might be thinking about drawing your name in one point perspective. I bet your name will have some complicated letters, letters with curves in them. Let’s figure out how to draw those curvy 3-D letters!
First draw the letter as a simple flat shape. It’s helpful to imagine the curved part of the letter as a rectangle bent around into a circular shape. This way you’ll have a good looking letter to start with.
If you’ve been following along with the box drawing and the other perspective letters you know the next step is to connect the letter’s corners to the vanishing point. This is easy for most of the areas but can be a bit tricky to recognize near the rounded portions of the letter.
Let’s consider any line’s transition a corner as well. Take a look at the drawing above…
We can consider the transition from the straight part of the line to the curved part of that line a corner too. As such we’ll be connecting that corner to the vanishing point too.
Pay attention to this next part (shown above)… The challenge arises when you have some rounded portions in which we wouldn’t see the side of the letter. To calculate the position of your perspective lines, simply pivot the ruler from outside the letter towards the letter. As soon as the ruler touches the curve, that is where you draw the perspective line.
Image that blue line above was calculated by pivoting a ruler from the vanishing point and as soon as the ruler touched the rounded, outside portion of the letter “P” the ruler is held steady and the line is drawn!
It’s often tricky to figure out what the rear parts of the curved letter would look like. Fortunately we can lightly draw the rear letter to help us figure this out! Study the image above. We’ll be doing this kind of thing often when drawing complicated objects in perspective!
After cleaning up some of the temporary lines we are left with a 3D looking letter drawing in one point perspective!
With the letter temporarily drawn, we can now emphasize the part we are actually trying to show.
Practice drawing your name in perspective. Think about the angles and/or curves of each letter and take your time.
Once you are proficient at drawing letters so they look three-dimensional a good next step would be to draw some one point perspective buildings. Much of what you learned so far will come in handy.
One Point Perspective Buildings
As an introduction to drawing exteriors, let’s draw a simple building in single point perspective. You’re going to discover some cool things about measuring within the one point perspective system!
Step 1
As always establish the horizon line and vanishing point. You’ll probably find it easiest if you draw the shape of the building’s frontal plane. In one point perspective this is simply a flat shape. The large rectangle above will serve as the front (closest) side of the building.When dealing with one point perspective architecture, most lines will be vertical or horizontal.
Step 2
The building is nothing more than a box. Connect the corners of the rectangle to the vanishing point and end the form with a vertical line. Note the perspective lines are drawn in red and are what gives the building depth.
Step 3
The building needs a door. This is a great opportunity to learn about how to center things in a perspective drawing. To find the middle of the rectangle, simply connect opposite corners. Once the middle of the rectangle (building wall) is determined, we can draw a vertical line straight through the intersection to get the two halves.
Step 4
With the middle of building marked, drawing the door is simple. We should probable draw a walkway too. Please note that the walkway consists of a pairperspective lines and must connect to the vanishing point.
Step 5
How about a door and a walkway on the receding side of the building? No problem. Check out the gray dotted line above. We can use that to help determine the appropriate height of the second door. Without that gray line(s) we would be guessing and our drawing would be prone to errors.
Did you notice the orange “x”? Yep, we can also find the perspective middle of a box’s side using that same corner-to-corner technique. I love that!
Step 6
A building needs some windows right? For the front side (frontal plane) it’s simple. Each window is very much a rectangle and doesn’t have any perspective to them. Of course if we had a close up with protruding window sills that would be a different story but slow down tiger, let’s not get ahead of ourselves… this just an introduction to perspective drawing 🙂
Step 7
Just like we did with door, we can use the front windows to calculate the heights of the windows on the other side of the building. I am about to drop a whole box of perspective cleverness right on your head!
Step 8
Pick one row of windows and draw them in. Make sure they get smaller and closer together as they appear farther away. There are ways to calculate this logarithmic spacing but don’t worry about those fancy-schmancy techniques just yet – Just do it by eye.
Step 9
With one row of windows drawn in place you can extend each of their vertical lines through the perspective lines (gray dotted) we drew earlier. The intersections will be precisely where each window needs to be drawn. My my, if this was any easier this drawing would practically draw itself!
Step 10
You guessed, it… just draw those windows in. The vanishing point takes care of all the spacing. It’s almost magical how drawing to a simple point can make things look real.
Step 11
As always you’ll need to clean up your drawing a bit.
Feeling confident? Try adding a street and a few more buildings. Heck, turn this into a one point perspective city if you’re felling ambitious!
Street Scene in 1pt. Perspective
With the previously drawn building fresh in our minds we have really gained some cityscape perspective skills. Let’s keep this momentum moving forward and draw out an entire street scene using a single vanishing point! This is going to take more steps but you’re going to love it!
Step 1
Before we can draw the street and buildings we need to establish our horizon line (eye level) and vanishing point.
Step 2
By connecting perspective lines to the vanishing point we can create the illusion of a road bound by a pair of sidewalks.
Step 3
Let’s create a side street off of the main perspective road. Notice how the side street is drawn with horizontal lines. I’ve also drawn those control-crack thingee’s onto the top surfaces of each sidewalk. They too are horizontal lines and get closer together as they move farther away.
Step 4
Up next is our first building. This building will be a house with the typical slanted roof. You’ll probably find it easiest to draw the largest, closest buildings first. Afterwards you can gauge the appropriate size of each subsequent building as they recede from our viewpoint. We already covered slanted planes when we drew 3D letters near the top of this article. If you are confused, go check out the section on drawing slanted letters.
Step 5
To draw a door on this house we need to first find the perspective middle. This is, of course, the compensated middle do the diminishing size effects of linear perspective. Make sure your door is a realistic size.
- How many doors wide is a house?
- How many doors tall is a house?
This type of thinking will prevent you from drawing doors that look unnaturally big for the architectural structure they adhere to.
Step 6
To include windows, draw the closest one first. Notice how the windows share the same set of perspective lines? This concept is pervasive throughout any type of linear perspective drawing. Just make sure to make the farther window smaller than the closer one.
Step 7
Add some more windows to make the house look convincing. Notice that no perspective was needed for the window on the front plane of the house. It’s just simple rectangles with no perspective at all!
Step 8
To draw a walkway leading to the house’s door, use a set of horizontal lines. The cracks in this walkway all connect to the vanishing point. Don’t get sloppy now… continue using your ruler!
Step 9
With the first house drawn in proper one point perspective we can move to the next farther house. While not all houses are the exact same size it would be wise to use the perspective lines of the first house to give us an idea of the proper size of the next house.
Step 10
And onward we go! Here’s yet another house. At this distance we can minimize the amount of details we choose to include.
Step 11
With just barely enough room it looks like we can hint at 2 more houses. As usual, everything is following the rules of perspective. All of these houses are based upon a simple perspective box
Step 12
With the right side of the road drawn in with all kinds of houses and architectural buildings we need to start on the left side of the road. This is very much the same process as earlier.
Step 13
For some added interest we can ad a set of stairs leading up to this house’s front door! Below in the advanced section I demonstrate how to draw stairs.
Step 14
Just like before we can add some windows to this house.
Step 15
Now let’s change things up slightly and draw this next house facing the other way! Variety can become important in a work of art.
Step 16
And on and on we draw… finish up the left side of the perspective street with as many houses we can reasonably fit.
Step 17
Perspective drawings can get a bit boring if everything is a straight line. Besides, the neighborhood we just created is in need of some foliage. We can dress up our perspective drawing by hand drawing some trees and bushes. Just keep in mind that they get smaller and less detailed the farther they are from us.
Step 18
A good final addition to any perspective scene is the use of some basic hatching or crosshatching. It will add some values, texture and shading to our marvelous street scene!
So far we’ve primarily been focused on how to draw the exterior of forms. But what about an interior? Let’s examine how to draw the inside of a room in proper one point perspective.
One Point Perspective Room
If you just jumped to this section hoping to learn how to draw a room in perspective, please review some of the techniques we used above. The section on drawing letters and the section on drawing a single building are full of useful information you can apply to a room drawing.
Let’s construct a one point perspective bedroom and include some of these typical items:
- bed
- chair & desk
- posters
- bedroom door
- rug
- bedroom window
One of the easiest ways to draw a room is to construct the empty “shell” of the room and then to place all of the room items inside. While there’s many ways one can go about this, I think it’s easiest to draw the back wall first go from there.
Step 1
When drawing interiors using the one point perspective method it’s best to draw the far facing wall first. This is nothing more than a rectangular shape. The proper height of the horizon line and position of the vanishing point can be calculated after the far facing wall (rectangle) is drawn. The horizon line (eye level) will determine from what height our viewers of the illustration are at.
The drawing above has a horizon line positioned for somebody standing and looking across the room.
After you’ve determined and drawn your horizon line, place a vanishing point somewhere on the line. Visually, the vanishing point is the point on the far facing wall that is directly in front of you. In the example above this room drawing will look as if we are standing central to the back wall and looking straight at it.
Step 2
Now connect the corners of the far facing wall (rectangle) to the vanishing point! The dotted lines are there just to show you that these perspective lines that make up the room’s side-walls are indeed drawn to the vanishing point. We only need the lines drawn from the rectangle (wall) outward… like in the example below.
Step 3
Cool huh? We’ve created an empty box that we appear to be inside of! Drawing interiors can be easy if we just take things one step at a time. With the room empty but 3D looking we can start adding some of the bedroom elements to this empty box / room.
step 4
Drawing a door on the back-facing wall is nothing more than a flat rectangle. There really isn’t any perspective involved in this part of the drawing.
Step 5
In the drawing above we’ve drawn a desk. Notice that the desk is box-like and connects to the vanishing point. If you’ve completed all of the perspective drawing exercises on this page this should be easy for you at this point!
Step 6
I don’t anybody’s bedroom that contains an empty desk so let’s add some detail to the desk area of the drawing. Notice that the laptop and the chair are also drawn to the vanishing point.
Step 7
This wouldn’t be a very effective bedroom scene if we didn’t include the bed. Remember to keep things simple. A bed is nothing more than a box-like form and can be drawn effortlessly if we connect it to the vanishing point.
Step 8
The quickest way to make a boring looking perspective drawing is to only include the ruler drawn architecture and not include some appropriate hand-drawn elements. As such I added some pillows, sheets, and a teddy bear for good measure! This is starting to look like a friendly, lived-in room!
Step 9
If you want to draw a rug on the floor of the bedroom just remember that it also get’s connected to the vanishing point.
Step 10
Finally we get the chance to add a window on the left side. You’ll notice that the window sill is a very thin, long box. Also notice that the lines that break up the window’s panes adhere to perspective rules: each section gets smaller as in recedes farther away.
Step 11
Of course no bedroom would be complete without some cool looking posters. The “Star Wars” poster hanging on the back wall is flat and contains no perspective. The posters on the right wall, however have to be drawn to the vanishing point.
Completed Room Drawing
While the horizon line and vanishing point is necessary for the drawing process, it really shouldn’t be included in your final drawing.
Advanced Perspective Concepts
Even though one point perspective is considered by most artists to be elementary there are things one can do to elevate the level of one’s drawing. When it comes to perspective drawing there is a seemingly endless array of techniques to arrive at clever solutions for accurately rendering our 3-D world on paper.
Since this entire page still has perspective drawing beginners at heart I will keep even these complex drawing problems as simple as possible. Check back later. I’ll be adding links to more pages that contain extremely meticulous steps to complex one point perspective problems.
The following are some simple solutions to some of the common problems you’ll encounter while drawing in one point perspective:
Circles
There’s more-or-less three simple solutions for drawing circles in one point perspective:
- draw a circle
- draw a vertical ellipse
- draw horizontal ellipse
If anything is circular and resides on the frontal plane / frontal wall you can simply represent the circle by drawing an undistorted circle. For all other instances you must draw the circle as an ellipse. A quick examination of a cylinder can yield all 3 solutions:
- Position A. of the cylinder is drawn with an undistorted circle.
- Position B. of the cylinder is drawn with horizontal ellipses.
- Position C. of the cylinder is drawn with vertical ellipses.
The shape of the ellipse can and should change depending on where it is in your drawing. Check out these various ellipses in the drawing below:
Notice how the ellipse becomes taller and more circular the farther it moves away from eye level (horizon line). At eye level an ellipse is a horizontal line! This principle of changing ellipses also applies to the vertical ellipses in our perspective drawings. The farther an ellipse moves away from the vanishing point (left or right) the wider and more circular the ellipses become.
Did you know, there’s a great way to calculate these circles in proper perspective? Construct things out of boxes first.
It’s easy to draw a convincing box first. Then you simply confine the ellipse to one or more of the box’s planes. That’s precisely what I did in the “Simple Cylinders in One Point Perspective” diagram above. The dotted lines show the box that holds the cylinder.
Perspective Grids
Almost every perspective drawing problem can be solved by using a perspective grid. Anytime you have a complicated shape or form that needs to be drawn in perspective you can draw a plane first. the plane should be an “envelope” that marks off the shape/object’s bounds. Next you can implement a grid inside that plane. If you grid out a plane on both a non perspective view and a perspective view you will be able to map things over. This is what the drawing below is demonstrating.
Normally drawing something like this word “GRID” would be really difficult to comprehend. How it would look foreshortened in perspective is tricky to gauge. Look how much easier it is to draw with the help of a perspective grid!
Did I mention that perspective grids are handy?
Yes sir indeed. When used properly they take all of the guesswork out of your drawing. A perspective grid can dictate the precise logarithmic spacing needed to make things look real. By logarithmic spacing I simply mean: draw things progressively smaller as they recede from vision. Study the example below to see how easy it is to set up:
Pyramids
A pyramid has a flat (polygon) base and triangular sides meeting at an apex. The need to draw a pyramid in perspective arises occasionally when drawing architecture. A cupola on a barn comes to mind.
To draw a pyramid in one point perspective do this:
- Draw a box that will encompus the pyramid
- Find the perspective middle of the box’s top
- Front that midpoint, extend the diagonal sides of the pyramid to the corners of the base
Stairs
Staircases are nothing more than a series of boxes. There are indeed some very complicated formulas for rendering staircases but this entire page is aimed at beginners.
A very simple way to draw stairs in one point perspective is to draw a series of boxes. Each box gets taller than the previous one as the stairs progress upward.
Just make sure that each step is drawn smaller in size as it recedes away from us!
Slanted Planes & Wedges
In one point perspective slanted planes end up having parallel lines that make up the front slant and the rear slant. It’s usually simple enough to place the slant by eye which is precisely what you can do much of the time.
Also worth noting is how we can use a little bit of geometry to calculate the matching slants for us. The diagrams below show how we can complete the box to help calculate the finishing line for the slanted plane. Even though we want a wedge shape, drawing the complete box in perspective first helps us out big time!
More…
If you want even more perspective examples to learn from and to challenge your drawing abilities, please check out Perspective Drawing Exercises for more!
Need a solution to a one point perspective drawing? Make a comment below.
